cui .com date 07/23/2013 page 1 of 4 series: md-xxfc description: mini din connector features ? pcb mount ? fully shielded ? right angle ? ground tabs ? ferrite filter rohs part number key specifications parameter conditions/description min typ max units rated input voltage 100 12 vac vdc rated input current at 100 vac at 12 vdc 1 2 a a contact resistance 30 m insulation resistance at 250 vdc 50 m voltage withstand for 1 minute 250 vac ferrite performance at 25 mhz at 100 mhz 13 27 insertion force 1 4.5 kg withdrawal force 0.8 3 kg operating temperature -40 85 c life 1,000 cycles md - xx fc base number pin options 30 = 3 pins 40 = 4 pins 50 = 5 pins 60 = 6 pins 70 = 7 pins 80 = 8 pins
cui .com cui inc series: md-xxfc description: mini din connector date 07/23/2013 page 2 of 4 4.7 0.19 0.43 11.0 8.5 0.33 3.7 0.15 13.8 0.54 ferrite spacer 3.5 0.14 5.5 0.22 0.52 13.2 2.0 0.08 0.3 0.01 (8 plcs) 3 6 7 8 54 1 2 6.5 0.3 0.26 0.56 14.1 0.01 0.51 13.0 0.01 (typ) 0.3 2.8 0.11 0.7 0.03 (8 plcs) mechanical drawings units: mm[inches] tolerance: 0.2mm material plating earth terminal brass tin contact terminals (1~8) phosphor bronze silver plastic pbt spacer ferrite 1 1 3 2 2 3 4 4 5 21 3 13.5 0.53 4.7 0.19 5.5 0.22 (2 plcs) (2 plcs) 0.43 11.0 8.5 0.33 (2 plcs) 13.5 0.53 4.7 0.19 5.5 0.22 (2 plcs) 8.5 0.33 (2 plcs) 0.9 0.04 11.0 0.43 13.5 0.53 4.7 0.19 5.5 0.22 (2 plcs) 8.5 0.33 (3 plcs) 11.0 0.43 (2 plcs) 1.3 0.05 2 4 pcb layout 3 1 top view 0.7x2.2 (3 plcs) 0.27 6.8 0.9 0.04 (4 plcs) 1 pcb layout 2 3 top view 0.7x2.2 (3 plcs) 0.04 0.9 (3 plcs) 6.8 0.27 5 4 pcb layout 3 1 2 top view 0.7x2.2 (3 plcs) 0.27 6.8 0.9 0.04 (5 plcs) md-30fc md-40fc md-50fc
cui .com cui inc series: md-xxfc description: mini din connector date 07/23/2013 page 3 of 4 6 1 2 3 4 5 3 1 6 7 8 54 2 13.5 0.53 0.04 0.9 5.5 0.22 (2 plcs) 8.5 0.33 (4 plcs) 11.0 0.43 (4 plcs) 4.7 0.19 13.5 0.53 4.7 0.19 5.5 0.22 (2 plcs) 8.5 0.33 (4 plcs) 11.0 0.43 (2 plcs) 78 top view 31 25 64 pcb layout 0.7x2.2 (3 plcs) 0.27 6.8 2.6 0.10 0.9 0.04 (8 plcs) 6 4 pcb layout 31 2 5 top view 0.7x2.2 (3 plcs) (6 plcs) 0.04 0.9 0.27 6.8 2.6 0.10 1 6 2 3 4 5 7 13.5 0.53 4.7 0.19 5.5 0.22 (2 plcs) 8.5 0.33 (4 plcs) 11.0 0.43 (3 plcs) 0.9 0.04 pcb layout 5 31 2 7 6 4 top view 0.7x2.2 (3 plcs) 0.04 (7 plcs) 0.9 6.8 0.27 2.6 0.10 MD-60FC md-70fc md-80fc
cui inc series: md-xxfc description: mini din connector date 07/23/2013 page 4 of 4 cui offers a one (1) year limited warranty. complete warranty information is listed on our website. cui reserves the right to make changes to the product at any time without notice. information provided by cui is believed to b e accurate and reliable. however, no responsibility is assumed by cui for its use, nor for any infringements of patents or other rights of third parties which may result from its use . cui products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. headquarters 20050 sw 112th ave. tualatin, or 97062 800.275.4899 fax 503.612.2383 cui .com techsupport@cui.com rev. description date 1.0 initial release 03/12/2012 1.01 updated spec, added ferrite performance 07/23/2013 the revision history provided is for informational purposes only and is believed to be accurate. revision history
|
